In the present work, an aluminum metal matrix reinforced with (Al₂O₃) nanoparticles was fabricated as a surface composite sheet using friction stir processing (FSP). The effects of processing parameters on mechanical properties, hardness, and microstructure grain were investigated. The results revealed that multi-pass FSP causes a homogeneous distribution and good dispersion of Al₂O₃ in the met...

this research paper presents the use of wasteful supplementary cementitious materials like fly ash and silica fume to conserve the cement used in concrete. the cement industry is one of the major producers of greenhouse gases and an energy user. in this study, portland cement was used as a basic cementitious material. fly ash and silica fume were used as the cement replacements by weight. the r...

Today concrete is most generally utilized development material in the world due to its strength and sturdiness properties. To attain good strength, curing of concrete is important so we introduce the concept of self-curing concrete rather than immersion or sprinkle curing to avoid water scarcity. It was observed that water solvent polymers can be utilized as a self-curing agent, i.e. polyethyle...

The effect of alkali content (% K2O + %Na2O) on the mechanical properties of alkali activated blast furnace paste has been investigated. The paper presents the study on workability, compressive strength, split tensile strength and microstructure of alkali activated blast furnace slag paste specimens prepared by using of sodium silicate and potassium hydroxide solution as activators. The experim...

This project presents the results of an experimental investigation of graphene oxide on physical properties of concrete. This article aims to find out the optimum quantity of graphene oxide required to achieve maximum compressive, tensile and flexural strength of concrete. Graphene oxide was added to the concrete in three mix proportions. Graphene oxide content were varied by 0.05%, 0.1%, 0.2% ...

The aim of the present study is to investigate the effect of variation of polypropylene fibres ranging from 0.1% to 0.4% along with 0.8% steel fibres on the behaviour of fibrous concrete. The mechanical properties of the concrete such as compressive and tensile strength have been investigated. The result shows that addition of polypropylene fibre has a little effect on the compressive strength,...

Results of an investigation conducted to study the effect of fibre hybridization on the strength characteristics such as compressive strength, split tensile strength, and water permeability of steel fibre reinforced concrete (SFRC) are presented. Steel fibres of different lengths, that is, 12.5 mm, 25 mm, and 50 mm, having constant diameter of 0.6 mm, were systematically combined in different m...

The use of supplementary cementitious materials (SCMs) in concrete manufacturing is considered as financial, technical and environmental benefit. In this regard, this paper presents the experimental and analytical study of high strength concrete (HSC) with alccofine-1203 (alccofine) and fly ash as partial replacements to cement. A total of seven mixes were prepared with different percentages of...

The paper presents the suitability of flyash-limephosphogypsum composite for its use in road pavements. The content of lime and phosphogypsum was varied from 2 to 10% and 0.5 to 4% respectively in flyash. The specimen prepared was cured for 7, 28, 56 and 90 days with burlap method of curing. Compaction tests were conducted on different flyash-lime-phosphogypsum composite and these results were ...